Results 1 to 5 of 5

Thread: NEED HELP FINDING 24x CRANK SENSOR TO BUY

  1. #1

    NEED HELP FINDING 24x CRANK SENSOR TO BUY

    Hi
    I can't find a place to buy a 24X crank sensor. ( GM part # 10137663 ) dealer is discontinued / I can't find aftermarket PLEASE HELP!!!!

    1994 3.4 Camaro w/auto

    Thanks in advance

    Stacy
    Last edited by stacy; 03-10-2018 at 07:32 PM.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many

  3. #2
    Full Throttle Extreme!
    Join Date
    Apr 2007
    Posts
    1,317
    Very hard to locate. Your best bet is to check the scrap yards. I was trying to convert one from a different vehicle but with no luck.
    Did you check with wot tech?

  4. #3
    no I hadn't check with WOT TECH , I'm new to the 6cly game and just picked up the Camaro for $500 that almost wants to start but then dies after stumbling for 15 sec and then wont restart at all.
    I figure I would just replace all the sensors because of the age of the car.
    I'm thinking its most likely the 7x or ignition controller.

    thanks for the info
    Stacy

  5. #4
    Full Throttle Extreme!
    Join Date
    Apr 2007
    Posts
    1,317
    I would test the sensors first, if they're good hold on to them. You also have a camshaft sensor. Also check all the vacuum lines, the front rubber tee in the intake manifold cracks when old. Most important is the one that goes to the map sensor, if it doesn't receive full vacuum you will have running issues.

  6. #5
    thanks for the heads upon the T
    I'm going to start checking stuff today and will report back the issues

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •