Results 1 to 4 of 4

Thread: Pcv help vn series 1

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Pcv help vn series 1

    Ok, got a Holden 1989 series 1 engine in my kitcar. It has a pcv located in a hole in the front of the intake valley just behind the alternator. There is no rubber seal at all. The top of the pcv goes a short "U" shaped hose that goes into the intake chamber.

    There is another hose going from the rhs rocker into the throttle body.

    I want to renew my pcv. My questions are...

    As pcv jammed into that hole doesnt look original
    It isnt the same set up as seen on google with a mount further forward.
    My current pcv has metal tubes each end but on ebay they advertise pcv for my enging without the bottom tube.
    Ive tried google. Its hell finging what I'm after.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •