THIS KIT CAME OFF A 1996 FIREBIRD 3800 V6 AUTO CAR.
This is a LOG STYLE turbo kit for the 3800 v6with out ac so you will have to remove the A/C . It connects to the other bank under the oil pan. First log style kit that I had made. I was trying to teach my brother on this kit how it all works and how to weld. Its a good kit. Works just fine. and will make good power.
You will have to relocate the battery. and we moved up the radiator alittle as well I beleave and egr delete. and a few other things witch I cannot remember, .ALOT OF THESE PICS BELOW WAS FROM MOCK UP http://s132.beta.photobucket.com/use...l?sort=3&o=137
THIS KIT WE RAN WITH A BASE TUNE AND A SMALL TURBO WITH 9PSI OF BOOST AND INTERCOOLED, A STOCK ENGINE, NEEDED ALOT MORE TUNNING AND STILL TURNED 12.9 AT THE 1/4. WOULD HAVE GONE FASTER WITH MORE TIME ON TUNNING. THIS KIT WILL COME WITH ALL THE HOT PIPE, THE DOWN PIPE THAT WE MADE FOR OUR TURBO. ALL THE COLD PIPE WE USED, WITH INTERCOOLER. THE TURBO IS ALSO HERE BUT WILL NEED A REBUILD. ITS A 57 TRIM MAJESTIC CUSTOM T3 T4 HYBREAD TURBO. ITS A NICE TURBO SETUP AND WORKS VERY NICE ON THE 3800 ENGINES. IT WAS CUSTOM BUILT FOR THIS PROJECT SUPPORTS 550HP. AND THE RACE GATE IS HERE AS WELL. IF YOUR INTERESTED IN THE HOLE SHABANG LET ME KNOW OK. I NEED ALL OF THIS GONE SO PLEASE ASK AWAY. PRICE IS $$$ 800.00 FIRM.. FOR EVERYTHING. I need the money to finish the v8 project thanks.
YOU CAN CALL OR TEXT OR PM ME
Last edited by Pacefabricating; 01-13-2013 at 10:02 AM.
Tell your brother hes a good welder/fabricator How much ground clearence does the crossover pipe have that goes under the oil pan have? I'm thinking of going that route when I build my turbo pipes. I would buy your kit... but I enjoy fabrication a lot.
I'd like to know how much $$ your asking too.
Hey Thanks Beach. He was learning. He was doing good. I didnt help much too much... You know I beleave we used like 2" piping for the cross over and it never got in the way and didnt change ground clearnce much from that to the k-member. I have seen the under k kits and takes away too much ground clearance on these f bodys.
On the price to be onist. I have no clue on where to start. Got alot of time into this. the turbo does need rebuild but that doesnt cost to much I think last time it was like 100 or so.
Log style turbo headers with crossover under engine
3" v- band down pipe.
all cold piping
intercooler air to air
A/C Delete ( different belt)
all v-band and t bolt clamps
t3/t4 hybread 57trim turbo ( needs rebuilt)
Oil feed line
Oil return line
Will need to do modifications to your F-body to get this kit to fit into your car.
Is used with out A/C. ( who needs a/c when you have the wind)
relocated battery to rear
Some Misc Stuff...
This kit makes some nice power and you will be happy... any questions or an offer PM me thanks
98 v6 camaro y87, k&N filter, SLP CAI, ngk iridium plugs, taylor 10.2mm blue wires, corvette servo, transgo hd-2 shift kit, lsd posi 3:23 gay rear!!!!,moog rear lca bushings, moog front upper and lower control arm bushings, moog upper and lower ball joints, new bigger 32mm front sway bar and 19mm rear bar with poly bushings, new poly torque arm bushing, new aluminum lower intake gasket from zzp, pacesetters headers