Results 1 to 2 of 2

Thread: suspension components used, etc. F-Body Auto-X applications

  1. #1
    Light Throttle atomicjoe23's Avatar
    Join Date
    Dec 2004
    San Diego, CA

    Smile suspension components used, etc. F-Body Auto-X applications

    It'd be nice to know what other people out there who are auto-xing their F-Body are using as far as suspension components and alignment settings go.
    This could probably be put in the suspension forum, but I put it here since I'm asking specifically for auto-X applications.

    I'm gonna add this because I don't think many people visit the A/X portion of this site. If you have questions involving suspension set-up, in general not just for A/X, I would consult Sam Strano. Sorry can't post the link since they aren't a sponsor, but the man is a National Champion and he uses a 4th gen F-body to do it. Not only that he knows what he's talking about and he is very easy to understand and very good at explaining things.
    1997 NA 3800 Series II Camaro (M5)
    Borla rear section
    K&N air filter
    Turbos in the future!!!

  2. # ADS
    Circuit advertisement
    Join Date
    Advertising world

  3. #2
    Full Throttle Extreme! hawgs's Avatar
    Join Date
    Oct 2004
    Houston, Texas
    For an alignment, a pretty extreme competition setting would be:

    1/32" to 3/32" Toe Out
    -1.3 to -1.5 Camber (whatever max is after the castor is set at 4.5)
    +4.5 Castor

    I run this on the street:
    0 Toe
    -0.7 Camber
    +4.5 Castor
    2008 5.3 A4 Chevrolet Avalanche
    2006 6.0 A4 Quicksilver Metallic GTO
    1999 3.8 A4 Bright Silver Metallic Firebird - Sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts