Search:

Type: Posts; User: redraif




Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Its an 87 firebird... it is a show car, but I'm...

    Its an 87 firebird... it is a show car, but I'm also trying to bring some performance to the platform...



    thank you. its needs alot of work like the car... lol. Both have been down for way...
  2. You can see the step down coupler I had to use......

    You can see the step down coupler I had to use... Its just too close in internal diameter size for my taste.... a modified 3.4 needs alot more air then that thing can meter, I'm sure!
    ...
  3. cool thank you for the info... I will be reading...

    cool thank you for the info... I will be reading it all!

    so I checked a stock maf I had in the attic... its just under 70mm... plus it has all the electronics and the cone taking up space. With...
  4. Honestly i assumed the v-6 was smaller then...

    Honestly i assumed the v-6 was smaller then 65mm... I don't have access to the car or maf presently. I was going by pics... the maf looked smaller then the tb in the pics for some reason. I was...
  5. had someone on third gen tell me: "The computer...

    had someone on third gen tell me: "The computer swap isn't exactly avoidable if you're looking to change from your stock MAF. Problem with the stock system is that the MAF doesn't put out a...
  6. Replies
    23
    Views
    5,453

    Yeah that is what I thought... You would think...

    Yeah that is what I thought... You would think my money would be good enough to at least flow them!
  7. Replies
    23
    Views
    5,453

    Per their request...I sent pics of my new ported...

    Per their request...I sent pics of my new ported heads with the 350 springs with modified seats to supersix and got a response that they looked about as good as it gets. That I probably ported them...
  8. Yep that's the question I wanted to avoid......

    Yep that's the question I wanted to avoid... LOL... I gave me 37ish ftlbs of tq to the wheels, but the hp... 2ish. I know its due to the fact the car was untuned... it has a 2800 stall... and the...
  9. Replies
    23
    Views
    5,453

    How did them removing the hump affect the...

    How did them removing the hump affect the performance? I just shark finned mine.
  10. Replies
    23
    Views
    5,453

    Any flow numbers on them? They look great btw! ...

    Any flow numbers on them? They look great btw! How did they perform on the car?
  11. Replies
    23
    Views
    5,453

    Well I must say.... just emailing back and forth...

    Well I must say.... just emailing back and forth with supersix has been a nightmare! I just want to know how much to bench flow the darn heads so I can compare to numbers I have found from other...
  12. LOL Car's mods include: 1995 Camaro 3.4L V-6...

    LOL
    Car's mods include:
    1995 Camaro 3.4L V-6
    SunCoast hood w functional Ram Air Box
    19lb Ford fuel injectors
    Holley Adjustable Fuel Pressure Regulator
    MSD Dual Connector Coil
    Truleo Intake...
  13. Used to be... have not been active in a while. ...

    Used to be... have not been active in a while. I've only been on a handful of times since 2006. Long story, but car has been in pieces since then. Bad economy and no job put a damper on things. ...
  14. Mas Air 2.8 car w/ a 3.4... what can I do to get a larger mas air?

    Is there any larger mas air that will talk to my computer? 1987 2.8L Auto. Or is there a way to modify the stocker. I have always been afraid to try as I know how sensitive and easy to ruin they...
  15. I have been looking into this and I have...

    I have been looking into this and I have contacted him to help! I don't plan to initially abandon this platform, as I owe it to truleo to give their intake a good fair shake. But it might be in my...
  16. Replies
    23
    Views
    5,453

    Well I knew back in the day they were the only...

    Well I knew back in the day they were the only place that did work on our heads. I had hoped they did decent work. Just trying to get all the right research done.

    Where is John out of? I...
  17. Replies
    23
    Views
    5,453

    Supersix motorsports porting

    Supersix motorsports porting... good / bad? Anybody have bench flow numbers for them? I contacted them directly, but they don't have the data anymore on the 3.4L iron heads. As some of you know my...
  18. The only reason I mentioned my cracked head was...

    The only reason I mentioned my cracked head was because it was present at the last dyno pull and I wondered if it could be affecting my HP numbers. I already have a new set of heads which I ported...
  19. The last run we did on the 2.8 was with an...

    The last run we did on the 2.8 was with an unbalanced block that violently shook and a backfired due to spark scatter caused by my end play on the distributor being off by .015 and the transmission...
  20. have been out of the picture a while... the heads...

    have been out of the picture a while... the heads and upper from a 3.5 motor? Is it front drive? How much modding to get the parts to mate up the the 3.4 block? Ive steered away from the 3400...
  21. Ok I finally got a call back from the dyno shop....

    Ok I finally got a call back from the dyno shop. I verified that he had all the car's information correct. It was. He uses a Dynojet model 248C. He has alot of shops that use his dyno to test and...
  22. bump for any other ideas

    bump for any other ideas
  23. Dyno guy never called me back. I guess I'll try...

    Dyno guy never called me back. I guess I'll try again on Monday. Anyone have any other thoughts?
  24. In ground dyno. I have a call in to Arthur to...

    In ground dyno. I have a call in to Arthur to check the specs he has on my car in his system... Anything specific you want me to ask him about the dyno when he returns my call?
  25. Dyno results showing the 2.8 to 3.4 swap... ...

    Dyno results showing the 2.8 to 3.4 swap...

    The May pull was with the 2.8, the December pull was with the 3.4. The only additional changes made before the 3.4 dyno pull was the addition of 3.73...
Results 1 to 25 of 48
Page 1 of 2 1 2