Search:

Next I’ll be putting on my 17x11 ZR1 rims with 315/35/17 tires, waiting on the tires to be delivered.

Got the hood on, needs some adjustment but I like it.63056306

Ordered the 2.5” Harwood cowl hood, ships 8-1. Will post pics when I get it. Haven’t been able to do much tuning because of the weather.

Redid the intake on the turbo.63026303

Got my scoop on, it will hold me over until I get the 2.5” cowl hood next February.6301

Going to redo the intake pipping on the turbo, the hose I used could collapse under boost. Ordered some 4” pipping and silicone couplers.

62996300

Got the battery moved to the hatch, air filter in and coolant res. Need to clean up the wires in the hatch.6298

Got the new tires and down pipe routed to the exhaust, it’s so quiet unless I open the 3” cutout. Have to wrap the down pipe to the Y. Where it used to mount. But it’s all 3” from the turbo to the...

Got my appointment for May 6th. Getting my new tires installed and the down pipe routed to the exhaust. Hopefully it makes it there and back. It’s only like 20 miles but on the way home it’s 14 miles...

Yeah I would put the maf settings to stock. Get bigger injectors, The GTP 36lb injectors are 33lbs on our fuel pressure, the 65lb injector ls 60lb on ours. Tune with injector flow for idle and PE add...

Good luck, I’m sure you’ll find the problem, coil’s and everything plugged in.

Even at 6psi you’ll need 36lb injectors, unless you run a FMU to bump fuel pressure. You can get 65lb(60lb on our fuel pressure) for $250, that’s what I have. Don’t want too skip out especially on...

3” all the way back, with a 3” electric cutout. I have a tubular K so alot more room. Going through where the A/C use to be.

I’d worry about part throttle and WOT, you running any boost? I’m only getting 6lbs, on a 10lb spring losing it because the eBay intercooler, has about a 4 psi drop, just going to use a 14lb spring...

A/F isn’t that bad, mine fluctuates low and high. Is that middle gauge fuel pressure, should be in the 40s at idle.

Don’t know, but good luck finding the problem, I just spent $500 on a battery and starter, turns out starter wire had corrosion all the way through it. I guess after almost 27 years in was bad.

Well there’s also Cartuning kit comes with everything but it’s $5000.

Getting my new tires and 3” down pipe routed to the 3” exhaust installed on April 14th.

Got my STB on, used a LS1 breather off Amazon only $22.6296

10lbs, maybe go 12lbs when tuned. All the engine mods and suspension really pays off.

Got some tuning in yesterday, did a couple of runs before my coating on the pipes started smoking pretty good, alittle lean and 3kr at 4000 rpm’s. Will change some stuff and take it out again. My...

Got the amp rack in and mounted the battery box, waiting for parts this next week to move the battery.6295

So while I wait for the hood, I’m getting the parts to move the battery to the rear.

6293
This is the hood I’m getting, it’s a Hardwood 2.5” cowl